Waterproof your basement by yourself
A large percentage of homeowners who have basements also experience water leaks, so it’s no surprise that there is a huge demand for do it yourself basement waterproofing information and products.
The first thing that we have to see is the cause of basement water seepage and flooding. Excess moisture in your basement not only limits your use of the space but it also can cause a number of serious problems structurally as well as ruin or destroy furniture and furnishings.
Basements are the part of a home or building that is wholly or partially below ground level. Loose soil, which can be compacted later, is used to fill the reminder of the hole once the walls and floor of the basement are ready. Water naturally finds its way through the path of least resistance, and in your case, that will be the looser soil around your basement. So eventually, even though it may take a few years, you will get a build-up of water around and even under, your basement.
This causes water to weigh down, and to exert pressure upon the floor, and upon the basement walls. This often attacks the outside membrane or protective coating, and/or water finds its way through tiny cracks or larger structural cracks. Even waterproofing systems with pipes designed to drain water from a building can become blocked due to silt or become overloaded by heavy rains.
It’s at this point that many people turn to do it yourself basement waterproofing rather than have the basement completely excavated and re-done, usually at great expense. Many people solve the problem by using sealants and similar products inside on the floor and walls.
A typical project might involve:
- typical projects involve removing loose material to prepare walls
- before starting, take off prior restoration or foreign substance.
- make sure the basement is as dry as possible, hire heaters or large fans if necessary.
- primer is used to prime the walls and floor if needed.
- patch any particularly noticeable flaws, gaps, seams or joints.
- a 1″ bead of sealant is used on the wall and floor junctions.
- final products which use 2 or 3 coats are enough.
That’s about it. A sealed basement shoul last for a number of years if the product is good. Top sealants such as PermaFlex are supposed to be a complete, permanent indoor basement waterproofing system. This indoor waterproofing system claims to permanently stop basement leaks and can be applied by brush, roller, or spray system.
A complete solution would cost the average homeowner hundreds of Dollars for a good-sized basement rather than thousands, is perfect for do it yourself basement waterproofing and is a great budget-conscious solution for a common and potentially expensive problem.
Related posts:
- The Scoop about Waterproofing your Basement Walls When you are finishing a basement, waterproofing basement walls is...
- Basement Waterproofing Systems For You In the past few years, more and more people have...
- Buying The Right Type Of Basement Floor Paint Choosing the best sort of basement ground paint when remodeling...
- Easy Basement Design Basement design and basement finishing necessities are usually disregarded at...
- Building Interesting Outdoor Rugs Outdoor rugs can be helpful in many ways if you...